Electronic thermostat for Fan Coil with deadband

Deadline fan coil thermostat DIAMOND NEW LINE with on/off switch and fan speed slide selector, adjustable dead band, double output heating/cooling, automatic changeover based on air. Internal sensor and facility for remote sensor. By means of the mechanical pins the angle of rotation of the knob can be limited.

Out of stock
Request info
Power supply 230V
Output Relay
Installation Wall
Thermostat type Fan Coil
Operation mode Dead band
Zona neutra termostato

What is the Deadband?

In some months there is a high temperature variation and it may be necessary on the same day to turn on the heating in certain hours and the cooling system in others. The same situation can occur in buildings with rooms with different exposures (e.g. north/south).

The deadband function of the thermostat responds to this need. A deadband is a temperature range in which neither heating nor cooling system turns on. The deadband prevents the thermostat from activating heat and cooling in rapid succession. This conserves energy by providing a range of temperatures requiring no energy consumption.

Technical features
  • Power supply 230V~ -15/+10% 50Hz
  • Working range 5 .. 35°C
  • Sensor NTC (10K Ohm @ 25°C)
  • Differential <0.5°C
  • Bicolour LED Heating/cooling
  • Slide switch 1 3 speeds
  • Slide switch 2 On/off
  • Dead band (int. trimmer) 1 .. 11°C
  • Dimensions H87 W132 D37mm
  • Protection grade IP30
  • Class Reg.2013/811/EC    I = 1,0%
Write Your Own Review
You're reviewing:Electronic thermostat for Fan Coil with deadband
Your Rating
2020 All rights reserved.