Flush mounted solar controller - Elios Mini

Analog differential flush mounted solar controller-Elios MIni for solar heating plants: it compares temperatures of fluids in the collectors and the storage tanks and, when the difference is greater than DeltaT, starts the heat exchange through the pump. 3 temperature inputs from NTC sensors and 2 on-off relay outputs SPST. Additional thermostat for driving auxiliary heat source. LEDs row show the value of measured temperature and others LEDs show output relays status. Configuration of 6 different system layouts.

Out of stock
Request info
Technical features
  • Power supply 230V ~ -15% +10% 50/60Hz
  • Power absorption 1,5VA
  • Inputs 2 x NTC 10K Ohm @ 25°C (110°c) - 1 x NTC 10K Ohm @ 25°C (200°c)
  • Sensor operating range 2NTC 10K (-50°C÷110°C) - 1NTC 10K (-50°C÷200°C)
  • Accuracy ±2°C
  • Contacts rating 2 x 3(1)A max @ 250V~ (SPST) powered
  • Protection grade IP20
  • Operating temperature range 0°C .. 40°C
  • Storage temperature range -10°C .. +50°C
  • Humidity limits 20% .. 80% non-condensing
  • Case ABS VO self-extinguishing
  • Dimensions H61 W118 D55mm
Write Your Own Review
You're reviewing:Flush mounted solar controller - Elios Mini
Your Rating
2020 All rights reserved.