Gas detector for multi-point systems

Based on the gas you need to detect, you can choose among the LPG or methane gas version.

Both versions of this gas detectors allow you to connect up to 10 detectors in cascade via the 3 dedicated terminals. The device is able to signal gas concentrations far below the hazard thresholds and other conditions relating to the state, via 4 LEDs and an internal buzzer. Possibility to connect one or more external buttons for the activation of a manual alarm. Possibility to connect one or more external buttons for system reset after an alarm.

Out of stock
Request info

Not only for industrial use

Even if it has been designed for an industrial use, this gas leak detector can be used also in other context. A common use case is in a garage, in order to detect possible leak from natural gas powered vehicles.

Application example

This gas detector can be employed in different situations: Airports, Bakeries, Battery Charging Rooms, Boiler Rooms, Chemicals storage Rooms, Ice making plants, Laboratories, Loading Docks / Bays, Operating Theatres, Universities, Vehicle repair shops, Fruit ripening, Green houses.

Rilevazione gas nelle officine
Technical features
  • Power supply 100 - 240V~ 50/60 Hz
  • Power consumption 3 VA
  • Sensor type Catalytic
  • Pre-alarm relay (2) A 250V~ SPDT
  • Alarm relay 3 (2) A 250V~ SPDT
  • IP rating IP 54
  • Dimensions 134W x 100H x 62D mm (including cable glands)
Write Your Own Review
You're reviewing:Gas detector for multi-point systems
Your Rating
2020 All rights reserved.