Obsolete
RDADA1

CO2 detector

Information, on the LCD, of the level of CO2 measured by the internal sensor. Voltage-free contact output, test function to ensure correct operation of the controller, option to change the alarm thresholds.

Out of stock
SKU
RDADA10001SE
Request info
Power supply 230V
Detected gas Corbon dioxide
Installation Wired
Cambio aria per co2

Avoid CO2 accumulation

According to DIN 1946-6 standard in order to keep CO2 level under 1000 ppm, it is necessary to ensure 30 m3/h of fresh air per person.

But how do I know when and how long I need to ventilate the room? This is the detector’s role. It allerts you when CO2 level is critical and it can even be connected with an automatic ventilation system for an even more efficient air exchange.

Where do we need to check CO2 level?

An accurate ventilation is fundamental to ensure people wellness. As a matter of fact, a high level of CO2 can lead to discomfort and drowsiness.

Here some example of places where high levels of CO2 can be reached: house, conference rooms, meeting rooms, classrooms, library, offices.

Technical features
  • Power 230V~/24V 50Hz
  • Absorption 2.0 VA max.
  • Detection range 0 .. 2000 ppm
  • Accuracy ±30ppm
  • Rated current  5(1)A 250V~ SPDT (Voltage-free)
  • Degree of protection IP30
  • Operating temp 0°C. 40°C.
  • Storage temp -10°C. + 50°C.
  • Humidity limits 20%. 80% RH - non-condensing
  • Dimensions 132W x 87H x 23.6D mm
Write Your Own Review
You're reviewing:CO2 detector
2020 All rights reserved.